top of page

Portable End Post for the Dynamic Range X1 and X1 Plus

This video demonstrates how to set up a portable moving target system for police departments or traveling trainers. The system uses a standard 10-foot 4x4 pressure-treated lumber as the base, with an end cap that allows easy setup using wires and earth anchors. You can get the kit to set this up here.



Quick Setup Summary:

  1. Mark Center Point: Choose where the 4x4 will stand.

  2. Anchor Points: Measure 140 inches from the center point to place the earth anchors.

  3. Install Earth Anchors: Drill them into the ground at the marked points.

  4. Attach End Cap: Place the cap on the 4x4 and secure it with screws if needed.

  5. Connect Ratchet Straps: Attach them to the cap and anchor points, keeping the ratcheting end close to the ground.

  6. Final Tightening: Adjust and tighten the straps securely.


This setup allows for a flexible, portable moving target system that can be easily transported and assembled without permanent installations. You can purchase a complete portable end post kit here.


-------------

We're always here to help you get the most out of your Dynamic Range X1 system. Feel free to reach out with any questions: info@dynamicrangex1.com




86 views0 comments

Comments


bottom of page